AIR-ROLL-1

Designed for light applications of welding smoke capture:

 

The AIR-ROLL-1 :


700 CFM at  the 6'' arm hood .
3 stages of air filtration:
1 washable spark pre-filter: ;  washable, vacuumable, cleanable
, 1 activated polyester carbon filter
1main filter spund jumped to 99% efficient @  micron;  washable, vacuumable, cleanable
One flexible fume arm of 7 feet long with
6 " diameter.
Large wheels and robust multi-directional with locks.
A very large door provides easy access to filters and waste drawer.
Filters can be cleaned dy vacuuming it..
1 HP motor, 110V/1/60 , very quiet 69 decibels less than

Optional HEPA filter 99.97% efficient at 0.3 micron
 

* WARNING; Do not vacuum explosive dust or explosive vapors in the AIR-ROLL-1.


Risk of explosion: Do not mix different types of dust in th
e unit.


Clean the unit and filters if you change the types of dust.


In uncertainty, ask Airomax for the application of security measures related to this unit.

 

 

 AIR-ROLL-1
 

EASY TO START UP

   

   1- Fix the fume arm on is base    2- Put the rubber band in place

 

                

     3- Plug it                                    4- Start it

 

 

VERY EASY TO CLEAN

       

   1- Loosen the bolts retained                   2- Open the access door

 

      

     3- Remove main filter                     4- Remove spark arrestor filter

 

5. Clean the filters with a vacuum or with pressure air and wash and than repeat the steps in reverse

 

 

 

*Airomax reserves the right to change specifications without notice mentioned

 

 

 

Fast delivery everywhere in North America

514-567-OMAX (6629)

info@airomax.net